fbpx

Combo Morgue Refrigerator (6 Body) – Roll-In, Transfer Options

Finishes:
Walls: Galvanized/Embossed – 26 Ga. – interior
Galvanized/Embossed – 26 Ga. & St. Stl. Type 304 #4 finish
Floors: Galvanized/Smooth – 14 Ga. – interior
Galvanized/Embossed – 26 Ga. – exterior
Ceilings: Galvanized/Embossed – 26 Ga. – interior & exterior

Panel Thickness:
Walls: 4″ UL Listed Class 1 Foam
Floors: 4″ UL Listed Class 1 Foam standard floor 1000 lb/ft² equally distributed (single layer of underlayment in floor)
Ceilings: 4″ UL Listed Class 1 Foam

Doors:
D01:
1 Finished opening 27″ x 21″ hinged overlap cooler door, 58″ sill
2 Hinge- Kason
1 Fasteners – Stainless Steel Screws/Lags for All Door Hardware Int & Ext
1 Special door / jamb construction – See notes
1 Heated Jamb (4 Sided) W/ Threshold
1 Gasket- Magnetic

D02:
1 Finished opening 27″ x 21″ hinged overlap cooler door, 58″ sill
2 Hinge- Kason
1 Fasteners – Stainless Steel Screws/Lags for All Door Hardware Int & Ext
1 Special door / jamb construction – See notes
1 Heated Jamb (4 Sided) W/ Threshold
1 Gasket- Magnetic

D03:
1 Finished opening 27″ x 51″ hinged overlap cooler door, 4″ sill
1 Ramp/24″ Deep, Exterior
2 Hinge- Kason
1 Fasteners – Stainless Steel Screws/Lags for All Door Hardware Int & Ext
1 Special door / jamb construction – See notes
1 Heated Jamb (4 Sided) W/ Threshold
1 Gasket- Magnetic

D04:
1 Finished opening 27″ x 51″ hinged overlap cooler door, 4″ sill
1 Ramp/24″ Deep, Exterior
2 Hinge- Kason
1 Fasteners – Stainless Steel Screws/Lags for All Door Hardware Int & Ext
1 Special door / jamb construction – See notes
1 Heated Jamb (4 Sided) W/ Threshold
1 Gasket- Magnetic

Accessories:
3 Caulk – Silicone Grey (Tubes)
1 Temp – 1967-3 Light Switch / LED Display
9 Lock Wall Panels to Floor Panels
17 Lock Wall Panels to Ceiling Panels (Factory Ceiling Caps – Standard)
1 Light- 1806LED000 (120v) Fixture (Mounted to Jamb) and Optic Globe(Ship Loose)

NOTE: Locate LED Globe Light Fixture Centered Above Middle Service Door
NOTE: Plywood Blocking (full height) along 9’0″ back wall (non door wall) – interior application
NOTE: Locate LED digital therm on top right exterior section of door wall (above service doors)
NOTE: All Service Door Frames/Openings to have Plywood Blocking

Refrigeration Unit Cooler
Manufacturer: Heatcraft
Model: PTN076H6BE
Description: Larkin PTN indoor
Electrical: 208-230/1/60
Conditions: BTUH: 8232 Room Temp: 39°F Ambient: 90°F

• Includes conveyor mechanisms & stainless steel body trays.
• Refrigeration unit ships unassembled, assembly manual included with shipment.

Read More
Clear
SKU: N/A Categories: ,

Description

KJ200

Roll-in morgue refrigerators are designed to be used in conjunction with a 1 tier or 2 tier body carrier. Bottom two (2) doors open to a compartment that easily accommodates a 2 tier body carrier that is simply rolled in or out. The KJ200 is compatible with the JB100 carts.

 

KD200

Roll-in/end opening combination morgue refrigerators are designed for use with telescoping mechanisms and a two tier body carrier. One door located directly over a roll in door. This cooler combines both the roll in and end opening features. Remove the cadaver by extending the telescoping mechanism or rolling the one tier or two tier body carrier out of the cooler.

 

 

 

 

Additional information

Openings

Conveyor, Telescoping

Request Technical Drawing

You may also like…