Overstock Inventory – Ready To Ship

Overstock Inventory Reduction Sale

Providing American-made medical equipment for the pathology, histology, necropsy, autopsy and mortuary industries, Mopec is the trusted solution for everything from autopsy tables and cadaver racks to grossing stations and body boxes. Due to recent ongoing disruptions in supply chains, Mopec ramped up production on a variety of products to reduce our lead times as much as possible. To help our customers save money, save time, and receive brand new products immediately, we’re having an Inventory Reduction Sale on some of our most in-demand and ready-to-ship products!

Limited availability – products are offered at a discounted rate while supplies last!

8 Foot Body Crane Lift – JD3008

When you want the versatility and convenience of a body lift, the JD3008 is the logical choice. Able to lift up to 1,000 pounds the JD3008 is an overhead body lift crane that will support safe transfer. The four locking casters provide secure positioning. The lower support fame is constructed of 10 gauge stainless steel and reinforced with welded support brackets for maximum strength. The JD3008 can be assembled in minutes and is designed to give many years of maintenance free service.

  • Mopec PowerLift with 1,000 lb capacity
  • (4) 6″ casters with swivel and brake
  • Adjustable nylon lift straps
  • Quick assembly
  • Handheld lift controller
  • To be used with customer’s existing ceiling track system
  • I-beam and legs included
  • request a quote
    BF840H purepath hepa air purifier

    PurePath HEPA Air Purifier
    – BF840H

    The BF840H PurePath HEPA Air Purifier is a heavy duty auxiliary air filtration unit designed to filter to ambient air to a minimum particle collective efficiency of 99.97%. Equipped with two particulate filters and two HEPA filters, the BF840H has the horsepower to capture airborne bacteria and viral organisms to help maintain a safe laboratory environment.

  • The BF840H has the horsepower to capture airborne bacteria and viral organisms to help maintain a safe laboratory environment
  • Constructed all of stainless steel
  • Equipped with two particulate filters and two HEPA filters
  • request a quote

    Dissecting Table W/ Shelf
    – BC125

    Dissecting table with shelf accommodates Mopec’s standard polyethylene or neoprene boards that can easily be lifted or pulled out partially or completely. Table top is tapered toward the middle to a centrally located drainage hole that allows fluids to flow freely. Sturdy legs allow this table to be set on any counter or autopsy table. 3′ of drain hose included.

  • Dimensions: 15.5″ (39 cm) H x 27″ (68 cm) L x 17″ (43 cm)W
  • Material: Stainless steel
  • Table can accommodate all Mopec Dissecting Boards up to 23″ (58 cm) x 16″ (40 cm)
  • Completely washable with any disinfectant
  • request a quote

    Autopsy Sink – Wall Mount, Center – CC100

    Save time and space with our C-Series Wall Mounted Autopsy Dissection Sinks. The body is transported on a moveable cart that adjoins a right sink approach for easy access. No additional lifting of the body is required. The cart trays overhang the sink to allow for proper fluid drainage.

  • Overall dimensions: 114″ L x 28″ W x 61″ H
  • 34″ (FFL) to bottom of work surface.
  • Stainless steel construction, center sink approach.
  • Hydro aspirator with reversing flow valve. Includes hose hanger and 8′ clear PVC tubing.
  • Two cold water body rinse valve with vacuum breaker and serrated hose fitting.
  • Includes hose hanger and 8′ clear PVC tubing.
  • Two hot and cold water fixture with wrist blade handles.
  • 8″ swing spout with vacuum breaker.
  • Four interchangeable removable stainless steel grid plates.
  • Grid plates constructed with 1/2″ recess and 3/8″ diameter holes on 2″ square centers.
  • Two GFCI duplex outlets with waterproof covers.
  • Two instrument drawers – Flush to the table when closed and fitted.
  • Flush inset handles at the top to keep fluid from accumulating in the drawers.
  • Two hand spray assemblies. Heavy duty brass chrome plated hand piece.
  • Durable 8′ long flexible hose. “J” hook to hold hand piece.
  • Concealed pressure control shut off.
  • Includes cart latch which is compatible with DA000 & DB000 cart chassis only.
  • Other Mopec carts are equipped with locking casters.
  • All plumbing and electrical work accomplished at factory.
  • Only trade hook up required.
  • All DA,DB,DC,DD and DF series carts are compatible with all CA,CB and CC series autopsy sinks.
  • request a quote

    Autopsy Table, Pedestal Style, Non-Elevating – CE100

    Pedestal style table that incorporates an optional elevating mechanism within the pedestal. A hydro-aspirator is conveniently located near the large sink basin for ease in collection and/or disposal of fluids.

  • Overall Dimensions of Standard Model: 100″ L x 30″ W
  • Sink Dimension: 12″ D x 25″ L x 12″ W
  • Material: Tabletop is 14 gauge stainless steel with #4 satin finish, built-in large Integral sink
  • Electrical:(2) GFCI Receptacles positioned on each side of table
  • Hydro aspirator: Designed to drain into sink, plumbed with water control valve, vacuum breaker and clear tubing
  • Faucet: Hot & cold single lever mixing valve with swing spout faucet complete with vacuum breaker
  • Sink Spray: Deck mounted chrome plated brass sink spray with high pressure hose
  • Grid plates: Four removable perforated grid plates, grid pattern is perforated with 3/8″ (9.5mm) diameter holes on 2″ (50.8mm) staggered centers
  • Capacity: 750 pounds
  • All plumbing and electrical work accomplished at factory.
  • request a quote

    Elevating “L” Shaped Autopsy Table Left Hand Wing – CE750

    L-shaped autopsy table with a pedestal design that includes all of the features necessary to perform an autopsy. Unit includes standard downdraft ventilation system. A hydro-aspirator is conveniently located near the sink basin for ease in collection and/or disposal of fluids. Waterproof electrical receptacles are provided on both sides of the table. A hot and cold water faucet is provided with a single lever and a vacuum breaker to safeguard the facility water supply. The table has a large sink and is creased toward the center for complete drainage. The wing or end of the table is supported by a cabinet pedestal which contains a drawer and storage compartment.

  • Overall Dimensions: Main table section 100″ L x 30″ W x 37″ H
  • Dimensions: Wing section 90″ L x 24″ W x 37″ H
  • Dimensions: Elevation Option: 32-40″ H
  • Material: All stainless steel construction.
    14 gauge stainless steel table top, sink and grid plates
    18 gauge stainless steel pedestal
    All type 304 stainless steel with #4 finish
  • Large utility pedestal with smaller storage support pedestal and support section.
  • Ventilation: Down draft ventilation (down draft dual cone system) in main section only.
  • Large sink integral to table top 12″ x 20″ x 10″ deep
  • Hydro aspirator: Designed with reversing flow valve. With hose hanger and 8′ of clear PVC tubing. Cold water control valve with vacuum brake swing spout.
  • Grid Plates: (4) interchangeable removable grid plates, stainless steel construction with 1/2″ recess and 3/8″ diameter holes on 2″ square centers.
  • Electrical: Two (2) GFCI duplex outlet with waterproof cover
  • Spray: Hand spray rinse. Heavy duty brass chrome plated hand piece. Durable 8′ long flexible hose. Hose hanger and “J” hook to hang hand piece. Concealed pressure control/shut off.
  • Removable pedestals if need for easier installation.
  • All plumbing and electrical work accomplished at factory. Only trade hook up required.
  • Unit is made to ship in 2 pieces and be assembled on site with a mechanical joint.
  • Optional add-ons include a CO009 table perimeter rinse, a CO012 removable ruler, and a CO017 scale stand mounted right on the table.
  • request a quote

    Embalming Machine, Right
    – CF100

    The CF100 Embalming Sink incorporates all the necessary features for full body embalming. The sink includes a hot and cold water fixture with a hydro-aspirator that is conveniently located to aspirate any fluids from the body in preparation for embalming. A body rinse fixture is provided for the cleaning and rinsing process during the final stages of body embalming. Heavy-duty grid plates are utilized to support the embalming machine. The drain surface below the grid plates are tilted toward the large sink, which includes a perimeter rinse. The perimeter rinse prevents fluids from accumulating anywhere on the surface.

  • Hot/Cold Sink Spray Assembly with High Pressure Hose
  • Vacuum Breaker Hydro Aspirator
  • Two (2) Removable Stainless Steel Perforated Grid Plates
  • Built-in Sponge Bowl
  • Stainless Steel Drawer with Drip Rail Handle
  • Quick Disconnect Air Ventilation Chambers
  • Two (2) GFCI Electrical Receptacles
  • Body Rinse consists of cold water valve, serrated hose fitting, vacuum breaker and 8″ clear tubing
  • All plumbing and electrical work accomplished at factory. Only trade hookup required
  • CF100 and CF200 Embalming Sinks can be utilized with attaching CF400 Embalming Cart
  • Dimensions: 84″ (213.7 cm) Long x 29″ (73.7 cm) Wide
  • Stainless Steel Embalming Sink (Large Sink 12″ (30.5cm) Long x 12″ (30.5cm) wide x 6.5″cm) deep
  • request a quote

    Autopsy Scrub Sink (Single Faucet) – CH100

    The hand washing scrub sink is an essential product for any anatomy lab providing a specific place to wash hands before and after an autopsy or any handling of infectious material. Designed with a 12″ high backsplash, full 3/4″ radius corner construction and hot & cold foot pedal valve. All welded integral construction, 14 gauge stainless steel with #4 satin finish, no parting seams which can collect bacteria in the sink and backsplash.

  • Overall Sink Dimensions: 26 3/4″(68cm) Long x 15 3/8″ (39cm) Wide x 11″ (28cm) High
  • Overall Dimensions: 30″ (76.2cm) Long x 19″(48.7cm) Wide x 23″ (58.5cm) High
  • Stainless steel scrub sink designed with a 12″ backsplash
  • Hot & cold foot pedal valve with gooseneck faucet
  • request a quote

    Covered Dissection Table With Lid Assist – HB1400

    Designed for anatomy labs and teaching facilities. Features a recessed top which eliminates the need for a body tray. Built with a slope, the table drains toward one end and into an optional drain bucket which is neatly suspended under the frame. Two hinged covers are provided to securely conceal the cadaver in a discrete manner. During the dissection, the hinged covers lock neatly and securely under the table. A PVC stop valve is located under the drain to stop the flow of fluids while emptying the bucket.

  • All stainless steel construction
  • Mopec-Exclusive Lid Assist: Hinged cover with swing latches for easy open and close
  • Built-in tapered slope
  • Includes drain hole PVC drain valve
  • Four heavy duty 5″ casters with (3) total lock and (1) directional lock
  • (4) Post sockets included
  • Weight capacity: Approximately 350 lbs
  • Dimensions: 86″ L x 30″ W
  • Sloped top height: 36″ – 35″ H
  • Exhaust requirements: 220-340 CFM
  • Static pressure: .34 – .67″ WG
  • Autopsy Cart, for Autopsy Tables – HE100

    This dissection top can be used as an add-on with most autopsy tables. The heavy duty casters allow you to roll the cart to any area of the autopsy table where additional grossing space is needed. This custom built cart features a flat top surface and a small shelf built underneath.

  • Dimensions: 48″ L x 24″ W x 40.5″ H with one end adjustable
  • The elevating cart top adjusts from 38.5″ to 41.5″ in 1″ increments.
  • Material: All stainless steel construction
  • Casters: 5″ Heavy duty casters with swivel locks and wheel brakes
  • request a quote

    Autopsy Cart, Chassis Only
    – HL200

    Specifically designed for use with portable x-ray fluoroscopy machines featuring a C-Arm electronic image detector. The tables open frame construction on one side allows the C-arm clear travel of almost the entire length of the table and sub frame.

  • Dimensions: Chassis Only: 79.5″ L x 26.75″ W x 37″ H
  • Material: All Stainless Steel Construction. Compatible with portable x-ray fluoroscopy machines with electronic image detector.
  • Open frame construction on one side.
  • Casters: (4) 8″ Heavy-duty non-corrosive powder coated casters.
  • Optional Grey ABS Plastic Cart Top
  • request a quote

    Dissection Table, Two Body Rotating Modified – HM100

    Specifically designed for use in anatomy labs where space is a concern with high student traffic. The two levels provide storage and access to the appropriate cadaver. The trays are smoothly rotated 180° with the anodized aluminum mechanism. Each tray has a small drain pan or drain plug.

  • Dimensions: 95″ L x 33″ W x 39.7″ H
  • Includes (2) fixed body trays
  • Tray dimensions: 26″ (66 cm) W x 78″ (198 cm) Long
  • Material: All Stainless Steel Construction with heavy-duty 304 tubing
  • Casters: Four locking casters
  • Weight capacity: 300 lbs per body tray
  • Rotation: Smoothly rotates from tier position, 180 degrees
  • Note: The cart should be loaded, unloaded and trays rotated by two operators to ensure a safe and smooth rotation. The cart is operated by manual force of pulling the bottom tray toward the operator and up. The weight of the cadavers must be approximately the same within 20 pounds. Any overtly imbalanced load may make it difficult to rotate trays.
  • request a quote

    32″ x 4 Tier Cantilever Storage Rack – IA32401

    Mopec’s adjustable cantilever storage racks are designed to support up to 500 pounds per tier. The storage rack is used along with Mopec’s body trays or autopsy cart tops which can be placed on the rack with a fork-type lift. Can be used with any-sized trays up to 32″ wide.

  • Heavy duty cantilever storage rack, 4 tier
  • Materials: All stainless steel
  • Holds 500 lbs per tier
  • Adjustable leveling pads
  • Modular construction
  • request a quote

    32″ X 4 X 01 4-Body Mortuary Rack (Roller Type) – IE32401

    The IE Series Mortuary Rack is an economical and efficient means of mass storage of cadavers. The standard mortuary rack configuration is five body high x the specified number of bays for lateral storage expansion, although you can order any configuration of bays and tiers. The rack is designed to accept standard size roller type body trays, Mopec Product GA100. Each Mortuary Rack Storage bay is provided with a roller type body tray. The unit is designed for on-site assembly. No welding is required. Contact a Mopec Representative for more information.

  • Type 304 stainless steel 11 gauge 1.5″ SQ tube
  • Nylon roller wheel assembly
  • Modular construction
  • (2) Body tray bumpers per bay
  • Includes (1) GA100 32″ body tray per bay
  • Heavy duty adjustable leveling pads
  • Weight capacity: Approximately 500 lbs per bay
  • Accommodates 32″ Body Trays: GA100 & GA300
  • Works with Cadaver Lifts: JD5001
  • Forklifts with JD420 Roller Pallet: JD710, JD305 and JD405
  • request a quote

    27″ X 2 X 01 Roller Rack Mobile – IF27201

    The IF Series Transporter is a multi-body carrier designed to transport cadavers on body trays. Heavy-duty construction allows safe removal or placement of cadavers by rolling the trays directly off the mortuary rack onto the Transporter. Each tier has a 500 pound weight capacity per level. Transporter is designed to work in conjunction with the IE100 Mortuary Rack.

  • All stainless steel construction
  • Polymer roller assembly
  • Four heavy duty 5″ casters, 3 total locks and 1 directional lock
  • Rear bars with bumpers for loading the body tray
  • Tray latch at each tier
  • Dimensions: 81.5″ L x 31.25″ W x 44.2″ H
  • 14.5″ body clearance between trays
  • 27″ tray x 2 tiers high x 1 bay
  • Accommodates 27″ Body Trays: JC101 (sold separately)
  • Works with Cadaver Lifts: JD301, JD501 and JD5001
  • request a quote

    Cadaver Lift 27″ Tray Roller Pallet – JD410

    The roller pallet is constructed in conjunction with the IE100 Morgue Rack and is designed to fit on the cadaver lifts. The main frame consists of two bearing rails, frame and tray lock. The JD400 and JD401 roller pallets consists of 10 individual replaceable nylon roller wheels. The two bearing rails are welded together by a spacer frame which has four mounting holes so that the pallet can be mounted on the forks of the cadaver lift. Two tray locks are on each end of the pallet so that the tray can be removed from either end. These tray locks are self locking to prevent trays from rolling off. Material is stainless steel with a #4 satin finish. All welds are a continuous bead weld with all burrs and discoloration removed.

  • Dimensions: 80 – 1/4″ (203cm) Long x 31 – 1/4″ (78cm) Wide
  • All Stainless Steel Construction
  • Roller Rack System
  • Fits all Mopec Cadaver Fork Lifts
  • Fits 27″ Heavy Duty Trays: JD410
  • request a quote

    Grossing Station Countertop Backdraft Ventilation – MB100

    Ideal for laboratories with space constraints, the MB100 is a compact workstation that rests on a counter top and saves valuable floor space. It may also serve as a secondary station in larger, busier, facilities that require an additional work surface to meet spikes in demand. The MB100 also features Mopec’s back draft ventilation system; safely pulling specimen odors and off-gas away from technicians – ensuring a safe work environment for your employees.

  • Dimensions: 48″ (122 cm) L x 29″ (74 cm) W x 45½ (116 cm) H
  • Small specimen sink: 10″ (25.4 cm) L x 5″ (12.7 cm) W x 3″ (7.6 cm) H – located in center of work shelf
  • Includes hot/cold water fixture, wrist blade handles with swing spout faucet and built-in vacuum breaker
  • Material: Recessed stainless steel work surface
  • Removable polyethylene cutting board 23″ (58.4 cm) L x 16″ (40.6 cm) W x ¾ (2 cm) H
  • Ruler: Washable ruler with inch & centimeter markings.Ruler is located on the inside lip of the workstation
  • Magnetic tool bar holds instruments when not in use
  • Bins: Organizer Bin-small (Qty 1) stainless steel;Organizer Bin-large (Qty 1) stainless steel
  • Leveling pads: 4
  • Stainless steel c-fold paper towel dispenser
  • Lights: Energy saving, long life LED lights (2)
  • Electrical: GFCI electrical receptacle, 1 circuit – 15 amps.
  • Electrical requirements: 115V – 60 Hz – 1 PH – 1 circuit – 20 amps.
  • 8-foot hospital grade line cord
  • Duct stub connection: 46″ (116.9 cm) L x 3″ (7.6 cm) W
  • Ventilation: Back draft ventilation designed to safely and efficiently remove formaldehyde fumes and hazardous chemical vapors. Equipped with a factory installed exhaust duct which can be connected to any in-house ventilation system
  • All plumbing and electrical work accomplished at factory
  • Only trade hook-up required
  • request a quote

    Ventilated Formalin Cube Station – BF100

    The BF100 is a ventilated gravity fed formalin dispensing system that holds one five gallon cube of formalin. It is a self-contained recirculation unit. A high speed fan pulls the formalin fumes away from the user. Two filters catch particles and formalin fumes. The BF100 includes an audio and visual alarm to notify the user of a leak or spill.
    When not in use, the spill containment pan folds up and is held in place with a snap strap.

  • Designed to safely evacuate fumes while filling containers
  • Recirculating Filtration System with Pull-Out Filter Drawer contains:
  • 1 BF005 – Potassium Permanganate Filter
  • 1 BF003 – Particle Filter
  • 1 BF101 Formalin Neutralization Pad
  • Drip and Spill Containment in Hinged Pan can hold a spill up to 1.6 gallon
  • Includes a formalin absorbing pad
  • Metal strap with push button snap holds drip pan in the closed position
  • Audio and Visual Alarm to alert personnel of spill. (Audio alarm can be muted)
  • Using 134 CFM, the Ventilated Formalin Cube will provide a safer work environment
  • 110V 60Hz Hospital Grade Line Cord
  • All Stainless Steel Construction
  • Dimensions: 15.2″ L x 36.17″D x 35.28″ H (Open)
  • D

  • imensions: 15.2″ L x 28.06″D x 18.5″ H (Closed)
  • request a quote

    Tall Cabinet Glazed Glass Swing Doors – LD345-48

    Mopec provides plenty of options for storing specimens or accessories. Whether you have a need for wall mount, base, corner, ventilated or specialty we can assist you with casework. Our cabinets height and width can be customized to suit your labs needs. All tall cabinets are 83-1/2″ high plus 1″ maximum adjustment of leveling feet. These custom cabinets include an added LV200 vent duct unit attached to the top, increasing the height of the units to 87-1/2″ to 88-1/2″.

  • All Cabinets are 87-1/2″ to 88-1/2″ H with added duct vent
  • Swing Glass Door Storage Unit
  • Glazed Glass Door
  • Five Adjustable Shelves
  • 1/4″ Float Glass
  • Stainless Steel
  • Units include a LV200 vent duct attached to the top
  • request a quote
    GL100-mortech-manufacturing-elevating-pathology-workstation

    Elevating Pathology Workstation – GL100

    Model GL100 Elevating Pathology Grossing Station is our premiere unit. All required features for any grossing procedure comes standard. All stainless steel construction of the entire work area and all exterior closure panels. Height adjustment from 32 in./81 cm. to 44 in./111 cm. via electro-hydraulic mechanism. Ergonomic knee space adjustments allow for seated working height Dissecting area rinse to provide a constant flow of water below the work area.

  • Exhaust duct for connection to building ventilation system with adjustable bellows. Includes both downdraft and backdraft ventilation.
  • Foot operated faucet control for hot and cold water.
  • Spray hose assembly with hand control.
  • Heavy-duty commercial waste disposal, 1/2 hp and switch.
  • Top mounted LED light fixtures.
  • Formalin container with spigot.
  • Stainless steel C-fold paper towel holder.
  • Magnetic instrument holder.
  • Polyethylene dissecting board.
  • GFCI duplex receptacle with waterproof cover.
  • request a quote
    GL115-mortech-manufacturing-pathology-workstation

    Pathology Workstation
    GL115

    Countertop pathology workstation with large sink basin. Larger basin allows unit to be equipped with an optional disposal unit.
    All necessary fixtures and accessories to perform routine grossing procedures.
    All stainless steel construction of the entire work area and all exterior closure panels.

  • Exhaust duct for connection to building ventilation system.
  • Integral sink with mixing faucet.
  • Top mounted LED light fixtures.
  • (1) LED light with 3x magnifier mounted on flexible arms.
  • Formalin container with spigot.
  • Stainless steel C-fold paper towel holder.
  • Magnetic instrument holder.
  • Polyethylene dissecting board.
  • GFCI duplex receptacle with waterproof cover.
  • request a quote

    Autopsy Carrier, Locking Caster – 600015TL

    Economically priced yet still perform well under heavy duty use. Cadaver lift accessible. This model comes with Mortech’s TOTAL LOCKING MECHANISM. Enables the carrier with “ONE LOCATION” locking to all casters, “ONE LOCATION” directional locking to assist in the steering of the carrier and “ONE LOCATION” locking release or neutral position.

  • 1.5in/3cm square, .12in tubing thickness, 304 stainless steel base frame.
  • Stainless steel has a grained finish and all welds match adjoining surfaces.
  • 8in/20cm casters all with brake mechanisms.
  • request a quote
    600019-D-mortech-manufacturing-Standard Dissection Platform With Drain

    Standard Dissection Platform With Drain – 600019-D

    Designed as an economical dissection platform for use in research laboratories and medical schools. Fabricated from heavy gauge 304 stainless steel with a No.4 finish.

  • All stainless steel construction.
  • 6 in./15 cm. casters, all with brake mechanisms.
  • request a quote
    600021-mortech-manufacturing-dissection-table-with-hood

    Dissection Table with Hood – 600021

    Ideal for use in any university cadaver dissection course. Provides maneuverability, convenient storage, and assists in the control of debris. Fabricated from heavy gauge 304 stainless steel with a No.4 finish. Hinged covers which can be securely closed when not in use and fastened beneath the table top when opened.

  • All stainless steel construction.
  • 6 in./15 cm. casters, all with brake mechanisms.
  • Recessed tabletop, creased toward drain for added fluid flow.
  • (2) Section hinged covers.
  • Latches and draw latch to hold covers in up/down/closed positions.
  • Stainless steel pail holder (pail optional).
  • .75 in./1 cm. Ball valve on drain for hose attachment and fluid control.
  • request a quote
    600040-H-mortech-manufacturing-Hydraulic Covered Cadaver Carrier with Rollers

    Hydraulic Covered Cadaver Carrier, Rollers – 600040-H

    The unit allows for the concealed removal/transport of a deceased patient from the hospital room to the morgue. A roller top frame allows easy transfer of a body tray from carrier to lift or carrier to refrigerator. The unit features adjustable elevation and easy steering control. The carrier comes with a single locking caster to assist in steering, and all casters locking to ensure stability while working.

  • Heavy gauge stainless steel roller frame.
  • Hydraulic base with height adjustment via hydraulic foot pedal.
  • Sturdy, lightweight aluminum top frame to conceal cadaver and is easily removable.
  • Fabricated cover made of launderable cloth (replacements available).
  • 8in/20cm casters all with brake mechanisms. Can lock instantly with a single foot pedal.
  • request a quote
    7011-3-30-mortech-manufacturing-portable-cremation-storage 3-Tier-rack-30-Wide-full -rollers

    Portable Cremation Storage 3-Tier, 30″ Wide – 7011-3-30

    Ideal for a variety of cadaver storage applications. More compact than conventional cantilever storage units, allowing for greater storage capacity without increasing space. Designed to be easily loaded and unloaded by a single person with our M601 roller pallet assembly which fastens to any of our cadaver lifts such as the M690. Fabricated from .120 thick stainless steel.

  • 6in/15cm casters, all with brake mechanisms, allow for easy movement.
  • (5) Roller assemblies mounted in each bay make loading and unloading the cadaver tray/cremation container easy.
  • Designed for use with our cadaver tray models: T3626 T3624 T3627
  • request a quote
    7011-4SL-mortech-manufacturing-Portable Cremation Storage 4-Tier Rack, Sideloading With Full Rollers

    Portable Cremation Storage 4-Tier, Sideloading – 7011-4SL

    All the great qualities of a portable cremation storage rack and allows a side-access loading style. Ideal for a variety of cadaver storage applications. More compact than conventional cantilever storage units, allowing for greater storage capacity without increasing space. Designed to be easily loaded and unloaded by a single person with our M601 roller pallet assembly which fastens to any of our cadaver lifts such as the M690. Fabricated from .120 thick stainless steel.

  • side access loading style
  • 6in/15cm casters, all with brake mechanisms, allow for easy movement.
  • (5) Roller assemblies mounted in each bay make loading and unloading the cadaver tray/cremation container easy.
  • Designed for use with our cadaver tray models: T3626 T3624 T3627
  • request a quote
    1036-234-72-mortech-manufacturing-72_ Mobile Downdraft Necropsy Table

    72″ Mobile Downdraft Necropsy Table – 1036-234-72

    Designed as an economical dissection platform for use in research laboratories and medical schools. Fabricated from heavy gauge 304 stainless steel with No.4 finish.

  • Length: 72″
  • All stainless steel construction.
  • Recessed tabletop, creased towards drain for added fluid flow.
  • 5 in./13 cm. casters, all with brake mechanisms.
  • (5) Removable 14ga perforated panels
  • request a quote
    1036-R109-mortech-manufacturing-Six Body Vertical Refrigerator

    Six Body Vertical Refrigerator – 1036-R109

    Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller. Heavy-duty chrome plated hardware for long lasting use. Unit ships knocked down and will require assembly. 38°Fahrenheit / 3.3°Celsius.

  • (6) three piece telescopic rack system. Fabricated of extruded aluminum with nylon rollers.
  • (6) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
  • (6) Overlap doors with magnetic gaskets.
  • (1) vapor proof light with switch.
  • request a quote
    1036-R116-mortech-manufacturing-Two Body Side Acting Refrigerator

    Two Body Side Acting Refrigerator – 1036-R116

    Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller. Heavy-duty chrome plated hardware for long lasting use. 38° Fahrenheit / 3.3° Celsius.

  • (2) Smooth and quiet rack slide rails using special Delrin rollers.
  • (2) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
  • (2) Overlap doors with magnetic gaskets.
  • (1) vapor proof light with switch.
  • request a quote
    1036-R101-mortech-manufacturing-Two Body Mobile Refrigerator

    Two Body Mobile Refrigerator – 1036-R101

    Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller. Heavy-duty chrome plated hardware for long lasting use. Unit ships fully assembled; simply plug unit into an outlet and the unit is operational. 38°Fahrenheit / 3.3°Celsius. Condenser is ~115V/60Hz/1Ph.

  • (4) 6in/15cm diameter casters, two are swivel type with wheel brakes.
  • (2) Three piece telescopic rack system. Fabricated of extruded aluminum with nylon rollers.
  • (2) 18 gauge, Type 304 stainless steel removable trays with No.4 finish.
  • (1) Overlap door with magnetic gaskets.
  • (1) vapor proof light with switch.
  • request a quote

    Three Body Refrigerator, 40″ Door – 1036-R114-3-40

    Drop in self-contained refrigeration system with digital thermometer and easy to adjust temperature controller. Heavy-duty chrome plated hardware for long lasting use. Unit ships fully assembled; simply plug unit into an outlet and the unit is operational. 38°Fahrenheit / 3.3°Celsius. Condenser is ~115V/60Hz/1Ph.

  • 30″ Wide Doors
  • 3) interior roller racks.
  • (3) HD plastic storage boards.
  • (1) Overlap door with magnetic gasket.
  • (1) vapor proof light with switch.
  • request a quote
    BE300 disposable gown guardian

    Disposable Poly Gowns – BE300

    These level 1 disposable gowns are light and breathable. The over-the-head design makes them easy to put on and take off, while the long sleeves and thumb hooks ensure all-day comfort. These gowns effectively protect against harmful germs, disease, and viruses. One-time use only. Dispose of immediately after use.

  • One size fits most
  • Color: Blue
  • Material: 100% CPE
  • Over-the-head, open-back design with tie closure at waist
  • Long sleeves with thumb-hooks for comfort
  • Single-use, non-sterile
  • request a quote
    L4 isolation gown guardian

    Level IV Isolation Gowns – BE304

    These level 4 isolation gowns offer the highest level of protection available and are used for high risk circumstances. The lightweight, breathable design allows for all-day comfort. They offer pathogen resistance, protection against non-airborne diseases, and are an effective barrier for fluids.

  • Sizes include Large and X-Large
  • Color: Blue
  • Material: 75% SMS, 25% PE
  • request a quote
    guardian shoe covers BE305

    Disposable Shoe Covers (50/case) – BE305

    This product is limited to one-time use. It should be discarded after use and cannot be reused.

  • 50 per case
  • Color: Blue
  • request a quote
    Body Bag BE167

    US GOV/DOD Modified Disaster Bag – BE167-CZ

    Designed to be similar to Dept of Defense (DOD) Specification NSN: 9930-01-331-6244 in strength and durability, the Mopec BE167-CZ contains the following deviations in order to improve production time during the height of the COVID-19 crisis.

  • 36″ x 96″
  • Heavy duty, 18 Mil PVC supported vinyl
  • Center zipper
  • Leak-proof, heat-sealed seams
  • 6 handles
  • request a quote
    BE175 safe view body bag guardian systems

    Guardian Safe View Body Bag – BE175

    Unique optically clear interior panel on the Mopec BE175 allows viewing the remains contained in the bag with minimal exposure risk to personnel. Both panels are secured with envelope style heavy-duty zippers with dual zipper pulls for easy access.

  • 36″ x 96″
  • Standard duty, 10 Mil Reinforced Coextruded Polyethylene
  • Envelope zipper
  • 300 lb. weight capacity
  • Features a clear viewing panel
  • Heat-sealed seams
  • request a quote
    Body Bag BE176

    Standard Duty, Center Zipper Body Bag – BE176

    The BE176 Body Bag is a standard body bag made of an 8 mil enforced coextruded polyethylene and features a center zipper, is suitable for cremation, and comes in a black color.

  • 36″ x 94″
  • 8 Mil Reinforced Coextruded Polyethylene
  • Center zipper
  • No handles
  • Suitable for cremation
  • Standard duty
  • request a quote
    BE178 body bag with Guardian logo

    Heavy Duty, Envelope Zipper Body Bag – BE178

    The BE178 Body Bag is a heavy duty body bag made of a 16 mil enforced coextruded PVC Vinyl and features an envelope zipper, 6 cut handles, and comes in a black color.

  • 39.5″ x 86.5″
  • 16 Mil PVC Vinyl
  • Envelope zipper
  • 6 cut handles
  • Heavy duty
  • request a quote
    BE179 body bag with Guardian logo

    Standard Duty, Envelope Zipper Body Bag – BE179

    The BE179 Body Bag is a standard duty body bag made of an 8 mil PEVA material and features an envelope zipper, 6 handles, and comes in a white color.

  • 31.5″ x 86.5″
  • 8 Mil PEVA
  • Envelope zipper
  • 6 handles
  • Standard duty
  • 400 lb. weight capacity
  • request a quote

    Item added to cart.
    0 items - $0.00
    Skip to content