Refrigerator – Walk-In 6 to 8 Body – KE500

  • Finishes:
  1. 26 Gauge Corrosion Resistant Stucco Embossed Coated Steel – Interior wall, Exterior wall, Interior ceiling
  2. 26 Gauge smooth galvanized-ceiling topside, floor bottom side
  3. 14 Gauge Galvanized – Interior floor
  • Box Description:
  1. (1) 48″(121cm) X 78″(198cm) Walk-In Door left-hand swing
  2. Includes door closer, cam lift hinges (one spring loaded), deadbolt key/padlock handle with inside release, magnetic gasket, heater wire, digital thermometer, double sweep gasket & switch with pilot light.
  3. (1) 48″(121cm) Interior Ramp With Non-Skid Strips Applied To Top (25-1/2″(63cm) Deep)
  4. (4) Vapor proof Light Fixture (Shipped Loose For Field Installation).
  5. (2) Medium Ceiling Mount Capsule-Pak Refrigeration System Opening (For Use With Non-Standard Capsule-Pak Locations)195 Sq. Ft. Of Super Floor Construction With .75″ Sub-Floor And Tubular Through-Panel Supports
  • Compressor Technical Data:
  1. (2) CPB075DC-A 4 Degrees Celsius Operation, Capsule-Pak Refrigeration System, Indoor Ceiling Mount High Temperature, “Off Cycle” Timer, R-404A Refrigerant, 208/230-1-60 Electrical Which Meets CEC Requirements.
  2. System Overall Size Is 37″(93cm) Wide x 48.25″(121cm) Long and 14.5″(36cm) High.
  3. 11 Total System AMPS, 9.3 Minimum Circuit AMPS, 15 Maximum Fuse Size.5.04 EER Rating ( system capacity 5237 BTU’s/hour at 26.7 Degrees Celsius ambient temperature. )
  4. Calculated load for Cooler (4.0 Degrees Celsius) is 7334 BTU’s/hour calculated from 24 Degrees Celsius ambient temperature, 21.1 Degrees Celsius floor temperature (uninsulated floor), 19 minutes of open door time per 24 hours for (1) 48″(121cm) x 78″(198cm) walk in door opening into 24 Degrees Celsius ambient (normal usage), no vent air no people working in the room, no additional electrical load, and 875 pounds of cadavers entering at 24 Degrees Celsius to be cooled in 24 hours.
  5. All calculations are based on data supplied by ASHRAE publications.
  • Clarifications:
  1.  Price does not include taxes,bonding or freight.
  2.  Shelving and trays are not included.
  3.  Facility is responsible for field verification.
  4.  Warranty: 18 month parts and labor, 5 year compressor, 15 year walk-in panel.
  5.  Refrigeration units ship unassembled. An assembly manual is included
Read More
SKU: KE500 Categories: ,


Mopec walk-in refrigerator insulated panels and refrigeration systems are manufactured as a system. Mopec walk in morgue refrigerators are designed to accept all types of Mopec morgue equipment. The panels are designed with cam lock latches for easy assembly and future expansion. Refrigeration systems are pre assembled with all controls factory tested prior to delivery.



Request Technical Drawing

You may also like…