fbpx
  • Embalming Cart with Various Tray Sizes
    Standard Features:
    • Full length table rinse with two full length table rinse bars on each side
    • Includes removable body tray
    • All water, electrical, drain and utilities are connected to the sink with quick disconnects.
    • Stainless steel ventilation connection chambers(Connect into embalming sink)
    • Total lock system
    Dimensions: 
    • 79" L x 33.75" W x 38.5" H
    Electrical:
    • Two GFCI receptacles
    Compatibility:
  • Dissection Table, Two Body Rotating – HM100
    • Dimensions: 95" L x 33" W x 39.7" H
    • Includes (2) fixed body trays Tray dimensions: 26" (66 cm) W x 78" (198 cm) Long
    • Material: All Stainless Steel Construction with heavy-duty 304 tubing
    • Casters: Four locking casters
    • Weight capacity: 300 lbs per body tray
    • Rotation: Smoothly rotates from tier position, 180 degrees
    • Note: The cart should be loaded, unloaded and trays rotated by two operators to ensure a safe and smooth rotation. The cart is operated by manual force of pulling the bottom tray toward the operator and up. The weight of the cadavers must be approximately the same within 20 pounds. Any overtly imbalanced load may make it difficult to rotate trays.
  • Autopsy Cart, C-Arm X-Ray with Optional Top
    • Dimensions: Chassis Only: 79.5" L x 26.75" W x 37" H With Top: 81.5" L x 32" W x 38" H
    • Material: All Stainless Steel Construction. Compatible with portable x-ray fluoroscopy machines with electronic image detector.
    • Open frame construction on one side.
    • Casters: (4)  8" Heavy-duty non-corrosive powder coated casters.
    • Optional Grey ABS Plastic Cart Top
  • Elevating C-Arm X-Ray Autopsy Cart, Tray Not Included- HL100
    • Dimensions: 79.11" L x 27-1/4" W Height ranges 35" at lowest point and 36" at highest point - manual crank
    • Material: Material finish is #4 satin finish .
    • Open frame construction
    • Subframe is designed with a slope of 1-1/2" and has a 4 piston lift with manual cranks
    •  Equipped with accessory rail for holding accessories
    • Casters : 8" non-corrosive heavy duty powder coated plastic-polyurethane tread casters
    • For use with optional body trays or cart top (Not Included)
  • Tilting Add-On Autopsy Cart – HE100
    • Dimensions: 48" L x 24" W x 40.5" H with one end adjustable
    • The elevating cart top adjusts from 38.5" to 41.5" in 1" increments.
    • Material: All stainless steel construction
    • Casters: 5" Heavy duty casters with swivel locks and wheel brakes
  • Removable Grid Plate Autopsy Cart – DF100
    • Dimensions: 80.5" Long x 30" Wide with a 60 Degree slope for easy cleaning (35" front to 36.5" back)
    • Material: All stainless steel construction with heavy duty 1.5" stainless steel tubing frame
    • Top: Stainless steel cart top with 2" recess and 2" edgeFour removable perforated grid plates
    • Casters: Heavy duty 8" casters with Total-Lock feature
    • Compatible with Mopec autopsy sinks
  • Roller 23″ Polyethylene Tray Autopsy Cart – DE300
    • Dimensions: 79" Long x 27.25" Wide x 31" High Body tray dimensions: 77.5" L x 23" W x 2.75" H
    • Material: All stainless steel construction with heavy duty 1.5" stainless steel tubing frame
    • Body Tray (JC200): PolyethyleneAvailable with or without drain hole, 77.5" Long x 23" Wide
    • Casters: Heavy duty 8" casters with Total-Lock feature
    • Rollers: Corrosion proof nylon
    • Compatible with Mopec autopsy sinks
  • Roller Autopsy Cart, Optional Tray Sizes & Fluid Collection
    Standard Features
    • All welded stainless steel frame, type 304 1.5" SQ. 16 gauge
    • Conveyor roller transfer style top
    • Optional 23" or 27" tray with drain hole and plug
    • Four heavy duty 8" casters with 3 total lock and 1 directional lock
    • Optional fluid collection system on 27" tray models
    Performance
    • Weight capacity: Approximately 375 lbs
    Dimensions
    • DE000 & DE100: 79" L x 27.25" W; Sloped top height: 35" – 32.6"
    • DE050 & DE200: 79" L x 31.25" W; Sloped top height: 35" – 32.6"
    • DE400: 79" L x 32" W ; Sloped top heights: 35" - 32.6"
    • DE401: 79″ L x 35.25″ W; Sloped top height: 35" – 32.6"
    Compatibility
  • Saddle Autopsy Cart, Various Tray Sizes, Optional Tray
    Standard Features
    • All welded stainless steel frame, type 304 1.5″ SQ. 16 gauge
    • Optional included body tray with drain hole and plug
    • Body tray saddles
    • Four heavy duty 5″ casters with 3 total lock and 1 directional lock
    Performance
    • Weight capacity: Approximately 375 lbs
    Dimensions
    • DD000 & DD100: 79" L x 25.75" W; Sloped top height: 35" – 34"
    • DD050 & DD200: 79" L x 28.75" W; Sloped top height: 35" – 34"
    Compatibility
  • Autopsy Cart, Bariatric with Tilting Option
    Standard Features
    • Non-removable bariatric top
    • All welded stainless steel frame, type 304 1.5" SQ. 11 gauge
    • Includes drain hole and plug
    • Four heavy duty 8″ casters with 3 total lock and 1 directional lock
    Performance
    • Weight capacity: Approximately 1000lbs
    Dimensions
    • 80.5″ L x 40″ W
    • Sloped top height: 37.4" - 34.3"
    • Tilting cart end (elevating model only) lifts from 35.7″ – 41.7″
    Compatibility
  • Hydraulic Dissection Cart with Optional Tops & Ventilation
    Standard Features
    • Twin pedestal hydraulics for easy foot activated elevation
    • Tilt-able top frame
    • Four heavy duty 8″ casters with total lock
    • Weight capacity: Approximately 500 lbs
    Dimensions
    • DC000: 53″ L x 31.25″ W
    • DC100, DC300, DC600 & DC850: 80.5″ L x 32″ W
    • HB300: 86" L x 30" W
    Range of Motion
    • Elevates from 30.25" to 43.75"
    Controls
    • Brake lever on both sides and one on end
    • Elevating pedals on both sides
    Compatibility
    • Autopsy Sinks: CA, CB & CC Series
    • Ventilation Option: Exhaust requirements of 350-500 CFM
  • Hand Crank Tilting Autopsy Cart with Optional Tops
    Standard Features
    • All welded stainless steel frame, type 304 1.5" SQ. 16 gauge
    • Top Options: No Top, Standard Stainless Steel Top, Stainless Steel Perimeter Trough Top, Fiberglass Perimeter Trough Top, Tan Plastic X-Ray Top
    • Tops include drain hole and plug
    • Four heavy duty 5″ casters, 3 total locks and 1 directional lock
    Performance
    • Weight capacity for stainless steel tops: Approximately 500lbs
    • Weight capacity for fiberglass top: Approximately 375lbs
    Dimensions
    • DB000: 53" L x 31.25" W; fixed end height of 35"
    • DB100, DB300, DB600 & DB850: 80.5" L x 32" W; fixed end height of 34.88"
    Range of Motion
    • Tilting cart end lifts from 36.44″ – 42.44″
    Controls
    • Hand crank with hydraulic lift system for tilting mechanism
    Compatibility
  • Autopsy Cart with Optional Tops
    Standard Features
    • All welded stainless steel frame, type 304 1.5" SQ. 16 gauge
    • Four heavy duty 5" casters, 3 total locks and 1 directional lock
    Performance
    • Weight capacity: Approximately 500lbs
    Dimensions
    • DA000: 53" L x 31.25" W
    • DA100, DA300, DA600 & DA850: 80.5″ L x 32″ W
    • 36.7" H - 34.7" H cart top post height to provide slope
    Compatibility
Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email has been sent successfully.