Necropsy presents a unique challenge with the diversity of specimens. We offer a range of standard animal science equipment and the capability to engineer custom solutions to fit your needs.

  • Workstation-Dual Draft  Exhaust with Drain Chamber-60 – OE300
    • Dimensions: 60" (152 cm) L x 29" (73 cm) D x 77.5" (195 cm) H
    • Style: Free standing unit
    • Ventilation: Provides down and back draft ventilation
    Standard Features:
    • Faucet:Fixture with swing spout
    • Magnetic tool bar: Available
    • Paper towel dispenser:Available
    • Bin: (1) large and  (1) small organizer bin
    • Ruler: Inch/centimeter ruler
    • Shelf: 12" (30 cm) Adjustable shelf
    • Light: Recessed energy saving long life LED light
    • Electrical options: GFCI outlet
    • Cutting board: 16" x 23" - white in color
    • Grid plates: perforated with .125" holes
    • Back draft grill
    • Down draft chamber and leg frame
  • Trimming Table – Ventilated – OA700
    • Dimensions: 78" Long x 30" Wide x 37" High
    • All Stainless Steel Construction
    • Ventilated Work Surface
    • Hot/Cold Fixture with wrist blade handles
    • Inner baffle is removable for cleaning
    • Perforated Grid Plates(interchangeable)
    • Two (2) G.F.C.I. Type Electrical Receptacle
    • Exhaust Chamber with adjustable air flow dampener
    • Sink Spray Assembly
    • Adjustable feet for leveling
     
  • Trimming Table – Rectangular Large Animal with Lift and Tilt – OA200
    • Dimensions: 84" long x 48" wide x 42" elevating height
    STANDARD FEATURES:
    • In-floor mounted pit-pit preparation provided by others to Mopec specification
    • .75" to 1" tilted top for drainage to pit drain
    • Heavy duty stainless steel top
    • Designed to handle a centralized load up to 2 000 pounds
    • Safety toe guard
    • Drain hole with removable mesh screen
    • Hydraulic lift system with hand held switch
    • Electrical Requirement: 115 V
    • NEMA 4-Internal mounted pump system
    •  Other load capacities are available
  • Trimming Table – Kidney Shaped Large Animal with Lift – OA110
    • Dimensions: 84" long x 48" wide x 42" elevating height-36" standard travel
    STANDARD FEATURES INCLUDE:
    • Heavy duty stainless steel top-10" In-set
    • Designed to handle a centralized load up to 2000 pounds
    • Safety skirting
    • Drain funnel with removable mesh screen
    • Scissor and frame(steel with epoxy finish)
    • Hydraulic lift system with hand held switch
    •  Other load capacities are available
     
  • Trimming Station – Down Draft Ventilated – OL200
    • Dimensions: 60" L (152.4cm) x 29.5" (74.9cm) W x 37" H (94cm)
    • Sink Dimension: 19x12x10
    • Stainless Steel Construction
    • Life cycle filter timer to alert for filter change
    • Front access filter replacement
    • Self contained unit. No facility ventilation required
    • Faucet: Fixture w/swing spout
    • Electricals: G.F.C.I. outlet
    • Grid plates: (3) removable grid plates (standard pattern) (3) removable fine mesh grid plates
    • Down draft ventilation
    • Fan control switch
  • Trimming Station – Down draft T-Shaped – OK300
    • Dimensions: 108" (274 cm) L x 96" (243 cm) D x 36" (91 cm) x 30" (76 cm) H
    • Material: Entire work surface is fabricated of 14 gauge stainless steel
    • Sink Dimension: Includes large 24" (60 cm) x 22" (55 cm) x 7" (17 cm) deep sink
    • Grid Plates: 8 Interchangeable grid plates
    • Rinse system: 2 Hand spray rinses
    • Ruler: Inch/centimeter ruler
    • Valve: Aspirating valve
    • Fixture: Water fixture and Sink rinse fixture
    • It is the responsibility of the customer to ensure there is adequate room from receiving to final destination of equipment.
  • Trimming Station – Down Draft Portable – OJ100
    • Dimensions: 48" L x 30" W x 37" H
    • Material: 14 gauge Stainless Steel
    • Casters: (4) Heavy duty casters with swivel locks
    • Grid plates: Removable grid plates
    • Electricals: GFCI electrical receptacle
    • Fixture: Water fixture with goose neck swing
    • Faucet and wrist blades
    • Ventilation:  10" Quick disconnect exhaust ventilation duct
  • Trimming Station – Portable Dual Draft – OG510
    • Dimensions: 36" L x 21" W x 53" H
    • 9' Hospital grade line cord
    • Filters:charcoal or potassium permanganate filter
    Standard Features:
    • Casters:Included
    • Dimension: 13" x 34" Worksurface
    • Draft system: Dual draft self-contained filter system;Perforated backdraft grill
    • Light: 24" Standard fluorescent light
    • Grid Plates: Removable perforated grid plates
    • Electricals: GFCI receptacle and Circuit breaker
    • Drain pipe
  • Trimming Table – Fold Down Wall Mount – OD100
    •  Dimensions: 45" L x 20" W
    •  Material: 18 gauge Stainless Steel with marine edge for fluid control
    • Capacity:  300 pounds
    • Release handle unlocks the table from an upright position to a 90 degree horizontal position.
  • Trimming Table – Total Draft – OA800
    •  Dimensions: 96" L x 30" w x 37" H
    •  Sink Dimensions: 20"W x 11"L x 10"D with an additional H/C water faucet located opposite the ventilation duct.
    •  Material: All Stainless Steel Construction. 14 gauge Stainless Steel.
    •  Draft System: Total down draft workstation w/sink; an internal baffle system provides a means of distributing air evenly across work surface.
    •  Grid Plates: Each of three grid plates. 16 gauge stainless steel construction, perforated with 1/2" diameter holes on 1" center.
    • Support Pedestal: Pedestal is complete with access doors at each end, reinforced corners and adjustable bolt for leveling Stainless Steel Construction.
    • Fixture: At each end a H/C fixture is located. Each is provided with wrist blade handles, large swing spout faucet w/ vacuum breaker protection.
    • Electricals: (2) GFCI protected watertight receptacles 115/1/60.
     
  • Trimming Table – Economical – OA600
    • Dimensions: 78" Long x 32" Wide x 37" High
    • Material: All Stainless Steel Construction
    • Hydro Aspirator: Hydro-Aspirator with Control Valve and Vacuum Breaker
    • Faucet: Swing Spout Faucet with Vacuum Breaker and Single Lever Control Mixing Valve
    • Weight capacity: 500 Lbs
    • Grid Plates:  (4) Interchangeable Perforated Grid Plates
    • Feet: Adjustable bullet feet
      
  • Trimming Table – Rotating Pedestal Mount – OA500
    • Dimensions: 60" Long x 30" Wide x 37" High
    • Material: All stainless steel construction
    • Rotation: Virtually effortless 180 degree motion
    • Draft Style: Down draft ventilation system
    • Pedestal anti-flood device
    • Electricals: Two (2) GFCI electrical receptacles
    • Hydro-Aspirator: Hydro-aspirator with control valve and vacuum breaker
    • Faucet: Swing spout faucet with vacuum breaker and a single lever hot/cold control mixing valve
    • Grid Plates: Perforated grid plates
     
  • Portable Necropsy Downdraft Trimming Table – OA113
    • Dimensions: 60" L x 30" W x 36" H 20" L x 6.5" W x 8" H vent chamber with 6" round duct stub
    • Material: 16 ga stainless steel top 1.5" sq stainless steel top
    • IPS 1.5 drain; Drain includes shut off valve
    • Casters: (4) 5" diameter swivel casters with locking brake
    • Grid Plates: (4) Removable perforated grid plates; (1) Removable solid grid plate
  • Trimming Table – Kidney Shaped Large Animal on Casters with Lift – OA111
    • Dimensions: 84" long x 48" wide x 42" elevating height
    • STANDARD FEATURES INCLUDE:
    • Casters: Mobile unit on casters
    • Material: Heavy duty stainless steel top
    • Capacity:  Designed to handle a centralized load up to 4,000 pounds and an offset load up to 2,000 pounds.
    • Electrical requirement: 115V
    • Safety toe guard
    • Accordion/bellows skirting
    • Removable drain funnel with limit switch protection
    • Lowering valve and necessary piping
    • The electric motor is a wash-down motor capable of withstanding high pressure wash downs
    • It is the responsibility of the customer to ensure that there is adequate room from receiving to final destination of equipment
    • LIFTING CAPACITY UP TO 4,000 LBS
  • Trimming Table – Rectangular Large Animal on Casters with Lift – OA101
    • Dimensions: 84" long x 48" wide x 42" elevating height
    STANDARD FEATURES INCLUDE:
    • Mobile unit on casters
    • Heavy duty stainless steel top
    • The OA101 is designed to handle a centralized load up to 5,000 pounds and an offset load of 2,500 pounds.
    • Safety toe guard
    • Accordion/bellows skirting
    • Removable drain funnel with limit switch protection
    • The hydraulic system consists of a directly coupled motor and pump combination, oil reservoir, solenoid operating lowering valve and necessary piping
    • Electrical requirement: 115 V .5 Hp
    • The electric motor is a wash-down motor capable of withstanding high pressure wash downs
    • It is the responsibility of the customer to ensure that there is adequate room from receiving to final destination of equipment
     
    • Internal mounted water pump system
    • Enamel coatedNOT AVAILABLE ON CUSTOM OR MODIFIED PRODUCTS NOT AVAILABLE FOR INTERNATIONAL SALES
  • Necropsy Type 316 Stainless – OO047
Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email has been sent successfully.